THE RATE EQUATION A guide for A level

THE RATE EQUATION A guide for A level

THE RATE EQUATION A guide for A level students KNOCKHARDY PUBLISHING 2008 SPECIFICATIONS KNOCKHARDY PUBLISHING THE RATE EQUATION INTRODUCTION This Powerpoint show is one of several produced to help students understand selected topics at AS and A2 level Chemistry. It is based on the requirements of the AQA and OCR specifications but is suitable for other examination boards. Individual students may use the material at home for revision purposes or it may be used for classroom teaching if an interactive white board is available. Accompanying notes on this, and the full range of AS and A2 topics, are available from the KNOCKHARDY SCIENCE WEBSITE at... www.knockhardy.org.uk/sci.htm Navigation is achieved by... either or clicking on the grey arrows at the foot of each page using the left and right arrow keys on the keyboard THE RATE EQUATION CONTENTS Collision theory Methods for increasing rate

Rate changes during a reaction The rate equation Worked examples Graphical methods for determining rate Half-life Rate determining step THE RATE EQUATION Before you start it would be helpful to know how the energy changes during a chemical reaction know the basic ideas of Kinetic Theory know the importance of catalysts in industrial chemistry REVISION COLLISION THEORY Collision theory states that... particles must COLLIDE before a reaction can take place not all collisions lead to a reaction reactants must possess at least a minimum amount of energy - ACTIVATION ENERGY plus particles must approach each other in a certain relative way - the STERIC EFFECT REVISION COLLISION THEORY Collision theory states that... particles must COLLIDE before a reaction can take place not all collisions lead to a reaction reactants must possess at least a minimum amount of energy - ACTIVATION ENERGY plus particles must approach each other in a certain relative way - the STERIC EFFECT

According to collision theory, to increase the rate of reaction you therefore need... more frequent collisions increase particle speed have more particles present more successful collisions give particles more energy or lower the activation energy or REVISION INCREASING THE RATE The following methods may be used to increase the rate of a chemical reaction INCREASE THE SURFACE AREA OF SOLIDS INCREASE TEMPERATURE SHINE LIGHT ADD A CATALYST INCREASE THE PRESSURE OF ANY GASES INCREASE THE CONCENTRATION OF REACTANTS REVISION RATE CHANGE DURING A REACTION Reactions are fastest at the start and get slower as the reactants concentration drops. In a reaction such as A + 2B > C the concentrations might change as shown Reactants (A and B)

Product (C) Concentration increases with time the steeper the curve the faster the rate of the reaction reactions start off quickly because of the greater likelihood of collisions reactions slow down with time as there are fewer reactants to collide CONCENTRATION Concentration decreases with time C A B TIME MEASURING THE RATE Experimental Investigation the variation in concentration of a reactant or product is followed with time the method depends on the reaction type and the properties of reactants/products e.g. Extracting a sample from the reaction mixture and analysing it by titration. - this is often used if an acid is one of the reactants or products Using a colorimeter or UV / visible spectrophotometer. Measuring the volume of gas evolved. Measuring the change in conductivity.

More details of these and other methods can be found in suitable text-books. MEASURING THE RATE RATE How much concentration changes with time. It is the equivalent of velocity. CONCENTRATION THE SLOPE OF THE GRADIENT OF THE CURVE GETS LESS AS THE REACTION SLOWS DOWN WITH TIME y x gradient = y x TIME the rate of change of concentration is found from the slope (gradient) of the curve the slope at the start of the reaction will give the INITIAL RATE the slope gets less (showing the rate is slowing down) as the reaction proceeds THE RATE EQUATION Format r k [] links the rate of reaction to the concentration of reactants it can only be found by doing actual experiments

it cannot be found by just looking at the equation the equation... A + B > C + D might have a rate equation like this r = k [A] [B]2 rate of reaction rate constant concentration units of units units of conc. / time usually mol dm-3 s-1 depend on the rate equation mol dm-3 Interpretation The above rate equation tells you that the rate of reaction is... proportional to the concentration of reactant A doubling [A] doubles rate proportional to the square of the concentration of B doubling [B] quadruples (22) rate ORDER OF REACTION Order tells you how much the concentration of a reactant affects the rate Individual order The power to which a concentration is raised in the rate equation Overall order

The sum of all the individual orders in the rate equation. ORDER OF REACTION Order tells you how much the concentration of a reactant affects the rate Individual order The power to which a concentration is raised in the rate equation Overall order The sum of all the individual orders in the rate equation. Value(s) e.g. in the rate equation and the order with respect to A is the order with respect to B is the overall order is r = k [A] [B]2 1 2 3 1st Order 2nd Order 3rd Order

need not be whole numbers can be zero if the rate is unaffected by how much of a substance is present ORDER OF REACTION Order tells you how much the concentration of a reactant affects the rate Individual order The power to which a concentration is raised in the rate equation Overall order The sum of all the individual orders in the rate equation. Value(s) e.g. in the rate equation and the order with respect to A is the order with respect to B is the overall order is r = k [A] [B]2 1 2 3 1st Order 2nd Order 3rd Order

need not be whole numbers can be zero if the rate is unaffected by how much of a substance is present NOTES The rate equation is derived from experimental evidence not by looking at an equation. Species appearing in the stoichiometric equation sometimes arent in the rate equation. Substances not in the stoichiometric equation can appear in the rate equation - CATALYSTS THE RATE EQUATION Experimental determination of order Method 1 Plot a concentration / time graph and calculate the rate (gradient) at points on the curve Plot another graph of the rate (y axis) versus the concentration at that point (x axis) If it gives a straight line, the rate is directly proportional to concentration - 1st ORDER. If the plot is a curve then it must have another order. Try plotting rate v. (conc.)2. A straight line would mean 2nd ORDER. This method is based on trial and error. THE RATE EQUATION Experimental determination of order Method 1 Plot a concentration / time graph and calculate the rate (gradient) at points on the curve Plot another graph of the rate (y axis) versus the concentration at that point (x axis) If it gives a straight line, the rate is directly proportional to concentration - 1st ORDER. If the plot is a curve then it must have another order. Try plotting rate v. (conc.)2. A straight line would mean 2nd ORDER. This method is based on trial and error. Method 2 - The initial rates method. Do a series of experiments (at the same temperature) at different concentrations of a reactant but keeping all others constant. Plot a series of concentration / time graphs and calculate the initial rate (slope of curve at start) for each reaction. From the results calculate the relationship between concentration and rate and hence deduce the rate equation. To find order directly, logarithmic plots are required. THE RATE CONSTANT (k)

Units The units of k depend on the overall order of reaction. e.g. if the rate equation is... rate = k [A]2 the units of k will be dm3 mol-1 sec-1 Divide the rate by as many concentrations as appear in the rate equation. Overall Order 0 units of k mol dm-3 sec-1 1 sec-1 example in the rate equation r = k [A] in the rate equation r = k [A] [B]2 2 dm3 mol-1 sec-1 3 dm6 mol-2 sec-1 k will have units of sec-1 k will have units of dm6 mol-2 sec-1 RATE EQUATION - SAMPLE CALCULATION

r [] [A] [B] Initial rate (r) 1 0.5 1 2 2 1.5 1 6 3 0.5 2 8

initial rate of reaction concentration mol dm-3 s-1 mol dm-3 In an experiment between A and B the initial rate of reaction was found for various starting concentrations of A and B. Calculate... the individual orders for A and B the overall order of reaction the rate equation the value of the rate constant (k) the units of the rate constant RATE EQUATION - SAMPLE CALCULATION [A] [B] Initial rate (r) 1 0.5

1 2 2 1.5 1 6 3 0.5 2 8 Compare Experiments 1 & 2 [B] same [A] 3 x bigger rate 3 x bigger rate [A] FIRST ORDER with respect to (wrt) A CALCULATING ORDER wrt A Choose any two experiments where... [A] is changed and, importantly,

[B] is KEPT THE SAME See how the change in [A] affects the rate As you can see, tripling [A] has exactly the same effect on the rate so... THE ORDER WITH RESPECT TO A = 1 (it is FIRST ORDER) RATE EQUATION - SAMPLE CALCULATION CALCULATING ORDER wrt B Choose any two experiments where... [B] is changed and, importantly, [A] is KEPT THE SAME See how a change in [B] affects the rate As you can see, doubling [B] quadruples the rate so... THE ORDER WITH RESPECT TO B = 2 It is SECOND ORDER [A] [B] rate [A] [B] Initial rate (r) 1

0.5 1 2 2 1.5 1 6 3 0.5 2 8 Compare Experiments 1 & 3 same 2 x bigger 4 x bigger rate [B]2 SECOND ORDER wrt B RATE EQUATION - SAMPLE CALCULATION [A] [B]

Initial rate (r) 1 0.5 1 2 2 1.5 1 3 0.5 2 [A] [B] Initial rate (r) 1 0.5

1 2 6 2 1.5 1 6 8 3 0.5 2 8 Compare Experiments 1 & 2 [B] same [A] 3 x bigger rate 3 x bigger rate [A] [A]

[B] rate FIRST ORDER with respect to (wrt) A OVERALL ORDER Compare Experiments 1 & 3 same 2 x bigger 4 x bigger rate [B]2 SECOND ORDER wrt B = THE SUM OF THE INDIVIDUAL ORDERS = 1 + 2 = 3 RATE EQUATION - SAMPLE CALCULATION [A] [B] Initial rate (r) 1 0.5 1

2 2 1.5 1 3 0.5 2 [A] [B] Initial rate (r) 1 0.5 1 2 6 2 1.5

1 6 8 3 0.5 2 8 Compare Experiments 1 & 2 [B] same [A] 3 x bigger rate 3 x bigger rate [A] [A] [B] rate FIRST ORDER with respect to (wrt) A rate = k [A] [B]2 Compare Experiments 1 & 3 same 2 x bigger

4 x bigger rate [B]2 SECOND ORDER wrt B By combining the two proportionality relationships you can construct the overall rate equation RATE EQUATION - SAMPLE CALCULATION [A] [B] Initial rate (r) 1 0.5 1 2 2 1.5 1 3 0.5 2

[A] [B] Initial rate (r) 1 0.5 1 2 6 2 1.5 1 6 8 3 0.5 2

8 Compare Experiments 1 & 2 [B] same [A] 3 x bigger rate 3 x bigger rate [A] [A] [B] rate FIRST ORDER with respect to (wrt) A rate = k [A] [B]2 re-arranging k = rate [A] [B]2 Compare Experiments 1 & 3 same 2 x bigger 4 x bigger rate [B]2 SECOND ORDER wrt B Chose one experiment (e.g. Expt. 3) and substitute its values into the rate equation k = 8

(0.5) (2)2 = 4 dm6 mol-2 sec-1 RATE EQUATION - SAMPLE CALCULATION [A] [B] Initial rate (r) 1 0.5 1 2 2 1.5 1 3 0.5 2 [A]

[B] Initial rate (r) 1 0.5 1 2 6 2 1.5 1 6 8 3 0.5 2 8 Compare Experiments 1 & 2

[B] same [A] 3 x bigger rate 3 x bigger rate [A] [A] [B] rate FIRST ORDER with respect to (wrt) A rate = k [A] [B]2 re-arranging SUMMARY k = rate [A] [B]2 Compare Experiments 1 & 3 same 2 x bigger 4 x bigger rate [B]2 SECOND ORDER wrt B Chose one experiment (e.g. Expt. 3) and substitute its values into the rate equation k = 8 (0.5) (2)2

= 4 dm6 mol-2 sec-1 RATE EQUATION QUESTIONS [A] / mol dm-3 No 1 Expt 1 Expt 2 Expt 3 CALCULATE 0.25 0.25 0.50 [B] / mol dm-3 0.25 0.50 0.25 Rate / mol dm-3 s-1 4 8 8 THE ORDER WITH RESPECT TO A THE ORDER WITH RESPECT TO B THE OVERALL ORDER OF REACTION THE FORMAT OF THE RATE EQUATION THE VALUE AND UNITS OF THE RATE CONSTANT

ANSWER ON NEXT PAGE RATE EQUATION QUESTIONS [A] / mol dm-3 No 1 Expt 1 Expt 2 Expt 3 Expts 1&2 Explanation: 0.25 0.25 0.50 [B] / mol dm-3 0.25 0.50 0.25 ANSWER Rate / mol dm-3 s-1 4 8 8 [A] is constant [B] is doubled Rate is doubled Therefore

rate [B]1st order wrt B What was done to [B] had exactly the same effect on the rate RATE EQUATION QUESTIONS [A] / mol dm-3 No 1 Expt 1 Expt 2 Expt 3 Expts 1&2 Explanation: Expts 1&3 Explanation: 0.25 0.25 0.50 [B] / mol dm-3 0.25 0.50 0.25 ANSWER Rate / mol dm-3 s-1 4 8 8 [A] is constant

[B] is doubled Rate is doubled Therefore rate [B]1st order wrt B What was done to [B] had exactly the same effect on the rate [B] is constant [A] is doubled Rate is doubled Therefore rate [A] 1st order wrt A What was done to [A] had exactly the same effect on the rate RATE EQUATION QUESTIONS [A] / mol dm-3 No 1 Expt 1 Expt 2 Expt 3 Expts 1&2 Explanation: Expts 1&3 0.25 0.25 0.50 [B] / mol dm-3 0.25 0.50 0.25

ANSWER Rate / mol dm-3 s-1 4 8 8 [A] is constant [B] is doubled Rate is doubled Therefore rate [B]1st order wrt B What was done to [B] had exactly the same effect on the rate Explanation: [B] is constant [A] is doubled Rate is doubled Therefore rate [A] 1st order wrt A What was done to [A] had exactly the same effect on the rate Rate equation is r = k[A][B] RATE EQUATION QUESTIONS [A] / mol dm-3 No 1

Expt 1 Expt 2 Expt 3 Expts 1&2 Explanation: Expts 1&3 0.25 0.25 0.50 [B] / mol dm-3 0.25 0.50 0.25 ANSWER Rate / mol dm-3 s-1 4 8 8 [A] is constant [B] is doubled Rate is doubled Therefore rate [B]1st order wrt B What was done to [B] had exactly the same effect on the rate Explanation: [B] is constant

[A] is doubled Rate is doubled Therefore rate [A] 1st order wrt A What was done to [A] had exactly the same effect on the rate Rate equation is r = k[A][B] Value of k Substitute numbers from Exp 1 to get value of k k = rate / [A][B] = 4 / 0.25 x 0.25 = 64 RATE EQUATION QUESTIONS [A] / mol dm-3 No 1 Expt 1 Expt 2 Expt 3 Expts 1&2 Explanation: Expts 1&3 0.25 0.25 0.50

[B] / mol dm-3 0.25 0.50 0.25 ANSWER Rate / mol dm-3 s-1 4 8 8 [A] is constant [B] is doubled Rate is doubled Therefore rate [B]1st order wrt B What was done to [B] had exactly the same effect on the rate Explanation: [B] is constant [A] is doubled Rate is doubled Therefore rate [A] 1st order wrt A What was done to [A] had exactly the same effect on the rate Rate equation is r = k[A][B] Value of k

Substitute numbers from Exp 1 to get value of k k = rate / [A][B] = 4 / 0.25 x 0.25 = 64 Units of k rate / conc x conc = dm3 mol-1 s-1 RATE EQUATION QUESTIONS [C] / mol dm-3 No 2 Expt 1 Expt 2 Expt 3 CALCULATE 0.40 0.20 0.40 [D] / mol dm-3 0.40 0.40 1.20 Rate / mol dm-3 s-1 0.16 0.04 1.44

THE ORDER WITH RESPECT TO C THE ORDER WITH RESPECT TO D THE OVERALL ORDER OF REACTION THE FORMAT OF THE RATE EQUATION THE VALUE AND UNITS OF THE RATE CONSTANT ANSWER ON NEXT PAGE RATE EQUATION QUESTIONS [C] / mol dm-3 No 2 Expt 1 Expt 2 Expt 3 Expts 1&3 Explanation: 0.40 0.20 0.40 [D] / mol dm-3 0.40 0.40 1.20 ANSWER Rate / mol dm-3 s-1 0.16 0.04

1.44 [C] is constant [D] is tripled Rate is 9 x bigger 2 Therefore rate [D] 2nd order wrt D Squaring what was done to D affected the rate (32 = 9) RATE EQUATION QUESTIONS [C] / mol dm-3 No 2 Expt 1 Expt 2 Expt 3 Expts 1&3 Explanation: Expts 1&2 Explanation: 0.40 0.20 0.40 [D] / mol dm-3 0.40 0.40 1.20

ANSWER Rate / mol dm-3 s-1 0.16 0.04 1.44 [C] is constant [D] is tripled Rate is 9 x bigger 2 Therefore rate [D] 2nd order wrt D Squaring what was done to D affected the rate (32 = 9) [D] is constant [A] is halved Therefore rate [C] 2 One half squared = one quarter Rate is quartered 2nd order wrt C RATE EQUATION QUESTIONS [C] / mol dm-3 No 2 Expt 1 Expt 2 Expt 3 Expts 1&3

Explanation: Expts 1&2 0.40 0.20 0.40 [D] / mol dm-3 0.40 0.40 1.20 ANSWER Rate / mol dm-3 s-1 0.16 0.04 1.44 [C] is constant [D] is tripled Rate is 9 x bigger 2 Therefore rate [D] 2nd order wrt D Squaring what was done to D affected the rate (32 = 9) Explanation: [D] is constant [A] is halved Therefore rate [C] 2

One half squared = one quarter Rate equation is r = k[C]2[D]2 Rate is quartered 2nd order wrt C RATE EQUATION QUESTIONS [C] / mol dm-3 No 2 Expt 1 Expt 2 Expt 3 Expts 1&3 Explanation: Expts 1&2 [D] / mol dm-3 0.40 0.20 0.40 ANSWER Rate / mol dm-3 s-1 0.40 0.40

1.20 0.16 0.04 1.44 [C] is constant [D] is tripled Rate is 9 x bigger 2 Therefore rate [D] 2nd order wrt D Squaring what was done to D affected the rate (32 = 9) Explanation: [D] is constant [A] is halved Therefore rate [C] 2 One half squared = one quarter Rate equation is r = k[C]2[D]2 Value of k Substitute numbers from Exp 2 to get value of k k = rate / [C]2[D]2 = 0.04 / 0.22 x 0.42 = 6.25 Units of k

rate / conc2 x conc2 = dm9 mol-3 s-1 Rate is quartered 2nd order wrt C RATE EQUATION QUESTIONS [E] / mol dm-3 No 3 Expt 1 Expt 2 Expt 3 CALCULATE 0.40 0.80 0.80 [F] / mol dm-3 0.40 0.80 1.20 Rate / mol dm-3 s-1 0.16 0.32 0.32

THE ORDER WITH RESPECT TO E THE ORDER WITH RESPECT TO F THE OVERALL ORDER OF REACTION THE FORMAT OF THE RATE EQUATION THE VALUE AND UNITS OF THE RATE CONSTANT ANSWER ON NEXT PAGE RATE EQUATION QUESTIONS [E] / mol dm-3 No 3 Expt 1 Expt 2 Expt 3 Expts 2&3 Explanation: 0.40 0.80 0.80 [F] / mol dm-3 0.40 0.80 1.20 ANSWER Rate / mol dm-3 s-1 0.16 0.32

0.32 [E] is constant [F] is x 1.5 Rate is UNAFFECTED Concentration of [F] has no effect on the rate Rate unchanged ZERO order wrt F RATE EQUATION QUESTIONS [E] / mol dm-3 No 3 Expt 1 Expt 2 Expt 3 Expts 2&3 Explanation: Expts 1&2 Explanation: 0.40 0.80 0.80 [F] / mol dm-3 0.40 0.80 1.20 ANSWER

Rate / mol dm-3 s-1 0.16 0.32 0.32 [E] is constant [F] is x 1.5 Rate is UNAFFECTED Concentration of [F] has no effect on the rate Rate unchanged ZERO order wrt F [E] is doubled [F] is doubled Rate is doubled Therefore rate [E] 2 2nd order wrt E Although both concentrations have been doubled, we know [F] has no effect. The change must be all due to [E] RATE EQUATION QUESTIONS [E] / mol dm-3 No 3 Expt 1 Expt 2 Expt 3 Expts 2&3 Explanation:

Expts 1&2 Explanation: Rate equation is 0.40 0.80 0.80 [F] / mol dm-3 0.40 0.80 1.20 ANSWER Rate / mol dm-3 s-1 0.16 0.32 0.32 [E] is constant [F] is x 1.5 Rate is UNAFFECTED Concentration of [F] has no effect on the rate Rate unchanged ZERO order wrt F [E] is doubled [F] is doubled Rate is doubled Therefore rate [E] 2

2nd order wrt E Although both concentrations have been doubled, we know [F] has no effect. The change must be all due to [E] r = k[E] RATE EQUATION QUESTIONS [E] / mol dm-3 No 3 Expt 1 Expt 2 Expt 3 Expts 2&3 Explanation: Expts 1&2 Explanation: 0.40 0.80 0.80 [F] / mol dm-3 0.40 0.80 1.20 ANSWER Rate / mol dm-3 s-1 0.16 0.32 0.32

[E] is constant [F] is x 1.5 Rate is UNAFFECTED Concentration of [F] has no effect on the rate Rate unchanged ZERO order wrt F [E] is doubled [F] is doubled Rate is doubled Therefore rate [E] 2 2nd order wrt E Although both concentrations have been doubled, we know [F] has no effect. The change must be all due to [E] Rate equation is r = k[E] Value of k Substitute numbers from Exp 1 to get value of k k = rate / [E] = 0.16 / 0.4 = 0.40 Units of k rate / conc = s-1

GRAPHICAL DETERMINATION OF RATE The variation in rate can be investigated by measuring the change in concentration of one of the reactants or products, plotting a graph and then finding the gradients of the curve at different concentrations. In the reaction A(aq) + B(aq) > C(aq) + D(aq) the concentration of B was measured every 200 minutes. The reaction is obviously very slow! RATE CALCULATION The rate of reaction at any moment can be found from the gradient of the tangent at that point. The steeper the gradient, the faster the rate of reaction Place a rule on the outside of the curve and draw a line as shown on the graph. y x gradient = y / x GRAPHICAL DETERMINATION OF RATE The variation in rate can be investigated by measuring the change in concentration of one reactants or product, plotting a graph and then finding the gradients of tangents to the curve at different concentrations. concentration =

1.20 mol dm-3 gradient - 1.60 mol dm-3 = 1520 min rate = - 1.05 x 10-3 mol dm- 3 The rate is negative because the reaction is slowing down RATE CALCULATION The rate of reaction at any moment can be found from the gradient of the tangent at that point. The steeper the gradient, the faster the rate of reaction Place a rule on the outside of the curve and draw a line as shown on the graph. y

x gradient = y / x GRAPHICAL DETERMINATION OF RATE The variation in rate can be investigated by measuring the change in concentration of one of the reactants or products, plotting a graph and then finding the gradients of the curve at different concentrations. The gradients of tangents at several other concentrations are calculated. Notice how the gradient gets less as the reaction proceeds, showing that the reaction is slowing down. The tangent at the start of the reaction is used to calculate the initial rate of the reaction. RATE CALCULATION The rate of reaction at any moment can be found from the gradient of the tangent at that point. The steeper the gradient, the faster the rate of reaction Place a rule on the outside of the curve and draw a line as shown on the graph. y x gradient = y / x

FIRST ORDER REACTIONS AND HALF LIFE One characteristic of a FIRST ORDER REACTION is that it is similar to radioactive decay. It has a half-life that is independent of the concentration. It should take the same time to drop to one half of the original concentration as it does to drop from one half to one quarter of the original. The concentration of a reactant falls as the reaction proceeds FIRST ORDER REACTIONS AND HALF LIFE The concentration of reactant A falls as the reaction proceeds The concentration drops from 4 to 2 in 17 minutes FIRST ORDER REACTIONS AND HALF LIFE The concentration of reactant A falls as the reaction proceeds The concentration drops from 4 to 2 in 17 minutes 2 to 1 in a further 17 minutes FIRST ORDER REACTIONS AND HALF LIFE The concentration of reactant A falls as the reaction proceeds The concentration drops from 4 to 2 in 17 minutes

2 to 1 in a further 17 minutes 1 to 0.5 in a further 17 minutes FIRST ORDER REACTIONS AND HALF LIFE The concentration of reactant A falls as the reaction proceeds The concentration drops from 4 to 2 in 17 minutes 2 to 1 in a further 17 minutes 1 to 0.5 in a further 17 minutes FIRST ORDER REACTIONS AND HALF LIFE A useful relationship k t = loge 2 = 0.693 where t = the half life Half life = 17 minutes k t = 0.693 k = 0.693 t k = 0.693 = 0.041 min-1 17 ORDER OF REACTION GRAPHICAL DETERMINATION

The order of reaction can be found by measuring the rate at different times during the reaction and plotting the rate against either concentration or time. The shape of the curve provides an indication of the order. ORDER OF REACTION GRAPHICAL DETERMINATION The order of reaction can be found by measuring the rate at different times during the reaction and plotting the rate against either concentration or time. The shape of the curve provides an indication of the order. RATE OF REACTION / mol dm-3 s-1 PLOTTING RATE AGAINST CONCENTRATION CONCENTRATION / mol dm-3 ORDER OF REACTION GRAPHICAL DETERMINATION The order of reaction can be found by measuring the rate at different times during the reaction and plotting the rate against either concentration or time. The shape of the curve provides an indication of the order. RATE OF REACTION / mol dm-3 s-1 PLOTTING RATE AGAINST CONCENTRATION ZERO ORDER the rate does not depend on the concentration. The line is parallel to the x axis. CONCENTRATION / mol dm-3 ORDER OF REACTION GRAPHICAL DETERMINATION The order of reaction can be found by measuring the rate at different times during the reaction and plotting the rate against either concentration or time. The shape of the curve provides an indication of the order.

RATE OF REACTION / mol dm-3 s-1 PLOTTING RATE AGAINST CONCENTRATION ZERO ORDER the rate does not depend on the concentration. The line is parallel to the x axis. FIRST ORDER the rate is proportional to the concentration so you get a straight line of fixed gradient. The gradient of the line equals the rate constant for the reaction. CONCENTRATION / mol dm-3 ORDER OF REACTION GRAPHICAL DETERMINATION The order of reaction can be found by measuring the rate at different times during the reaction and plotting the rate against either concentration or time. The shape of the curve provides an indication of the order. PLOTTING RATE AGAINST CONCENTRATION SECOND ORDER the rate is RATE OF REACTION / mol dm-3 s-1 proportional to the square of the concentration. You get an upwardly sloping curve. ZERO ORDER the rate does not depend on the concentration. The line is parallel to the x axis.

FIRST ORDER the rate is proportional to the concentration so you get a straight line of fixed gradient. The gradient of the line equals the rate constant for the reaction. CONCENTRATION / mol dm-3 ORDER OF REACTION GRAPHICAL DETERMINATION The order of reaction can be found by measuring the rate at different times during the reaction and plotting the rate against either concentration or time. The shape of the curve provides an indication of the order. PLOTTING RATE AGAINST CONCENTRATION SECOND ORDER the rate is RATE OF REACTION / mol dm-3 s-1 proportional to the square of the concentration. You get an upwardly sloping curve. ZERO ORDER the rate does not depend on the concentration. The line is parallel to the x axis. FIRST ORDER the rate is proportional to the concentration so you get a straight line of fixed gradient. The gradient of the line equals the rate constant for the reaction. CONCENTRATION / mol dm-3 ORDER OF REACTION GRAPHICAL DETERMINATION

The order of reaction can be found by measuring the rate at different times during the reaction and plotting the rate against either concentration or time. The shape of the curve provides an indication of the order. PLOTTING RATE AGAINST TIME ZERO ORDER RATE OF REACTION / mol dm-3 s-1 A straight line showing a constant decline in concentration. FIRST ORDER A slightly sloping curve which drops with a constant half-life. SECOND ORDER The curve declines steeply at first then levels out. TIME / s ORDER OF REACTION GRAPHICAL DETERMINATION Calculate the rate of reaction at 1.0, 0.75, 0.5 and 0.25 mol dm-3 Plot a graph of rate v [A] Calculate the time it takes for [A] to go from... 1.00 to 0.50 mol dm-3 0.50 to 0.25 mol dm-3 Deduce from the graph that the order wrt A is 1 Calculate the value and units of the rate constant, k RATE DETERMINING STEP

Many reactions consist of a series of separate stages. Each step has its own rate and rate constant. The overall rate of a multi-step process is governed by the slowest step (like a production line where overall output can be held up by a slow worker). This step is known as the RATE DETERMINING STEP. If there is more than one step, the rate equation may not contain all the reactants in its format. RATE DETERMINING STEP THE REACTION BETWEEN PROPANONE AND IODINE Iodine and propanone react in the presence of acid CH3COCH3 + I2 The rate equation is... r = k [CH3COCH3] [H+] Why do H+ ions appear in the rate equation? Why does I2 not appear in the rate equation? CH3COCH2I + HI RATE DETERMINING STEP THE REACTION BETWEEN PROPANONE AND IODINE Iodine and propanone react in the presence of acid CH3COCH3 + I2

CH3COCH2I + HI The rate equation is... r = k [CH3COCH3] [H+] Why do H+ ions appear in the rate equation? The reaction is catalysed by acid [H+] affects the rate but is unchanged overall Why does I2 not appear in the rate equation? The rate determining step doesnt involve I2 RATE DETERMINING STEP THE REACTION BETWEEN PROPANONE AND IODINE Iodine and propanone react in the presence of acid CH3COCH3 + I2 CH3COCH2I + HI The rate equation is... r = k [CH3COCH3] [H+] Why do H+ ions appear in the rate equation? The reaction is catalysed by acid

[H+] affects the rate but is unchanged overall Why does I2 not appear in the rate equation? The rate determining step doesnt involve I2 The slowest step of any multi-step reaction is known as the rate determining step and it is the species involved in this step that are found in the overall rate equation. Catalysts appear in the rate equation because they affect the rate but they do not appear in the stoichiometric equation because they remain chemically unchanged RATE DETERMINING STEP HYDROLYSIS OF HALOALKANES Haloalkanes (general formula RX) are hydrolysed by hydroxide ion to give alcohols. RX + OH- With many haloalkanes the rate equation is... r = k [RX][OH-] This is because both the RX and OH- must collide for a reaction to take place in ONE STEP ROH + X- SECOND ORDER RATE DETERMINING STEP HYDROLYSIS OF HALOALKANES

Haloalkanes (general formula RX) are hydrolysed by hydroxide ion to give alcohols. RX + OH- ROH + X- With many haloalkanes the rate equation is... r = k [RX][OH-] This is because both the RX and OH- must collide for a reaction to take place in ONE STEP SECOND ORDER but with others it only depends on [RX]... FIRST ORDER The reaction has taken place in TWO STEPS... - the first involves breaking an R-X bond - the second step involves the two ions joining r = k [RX] i) ii) RX R + + XR+ + OHROH

Slow Fast The first step is slower as it involves bond breaking and energy has to be put in. The first order mechanism is favoured by tertiary haloalkanes because the hydroxide ion is hindered in its approach by alkyl groups if the mechanism involves the hydroxide ion and haloalkane colliding. RATE DETERMINING STEP The reaction H2O2 + 2H3O+ + 2I Step 1 H2O2 + I Step 2 IO + H3O+ Step 3 HIO + H3O+ + I I2 + 4H2O IO + H2O HIO + takes place in 3 steps SLOW H2O

FAST I2 + 2H2O FAST The rate determining step is STEP 1 as it is the slowest RATE DETERMINING STEP The reaction H2O2 + 2H3O+ + 2I Step 1 H2O2 + I Step 2 IO + H3O+ Step 3 HIO + H3O+ + I I2 + 4H2O IO + H2O HIO + takes place in 3 steps SLOW

H2O FAST I2 + 2H2O FAST The rate determining step is STEP 1 as it is the slowest The reaction 2N2O5 4NO2 + O2 takes place in 3 steps Step 1 N2O5 NO2 + NO3 Step 2 NO2 + NO3 NO + NO2 + O2 FAST Step 3

NO + 2NO2 FAST NO3 The rate determining step is STEP 1 SLOW from another Step 1 rate = k [N2O5] OTHER TOPICS Autocatalysis A small number of reactions appear to speed up, rather than slow down, for a time. This is because one of the products is acting as a catalyst and as more product is formed the reaction gets faster. One of the best known examples is the catalytic properties of Mn2+(aq) on the decomposition of MnO4(aq). You will notice it in a titration of KMnO4 with either hydrogen peroxide or ethanedioic (oxalic) acid. Molecularity e.g. The number of individual particles of the reacting species taking part in the rate determining step of a reaction A + 2B A

C+D 2B molecularity is 3 - one A and two Bs need to collide however has a molecularity of 1 - only one A is involved THE RATE EQUATION The End 2009 JONATHAN HOPTON & KNOCKHARDY PUBLISHING

Recently Viewed Presentations

  • Friend For Life

    Friend For Life

    We believe the use of multiple-model simulation and during online optimal control is critical to reliability. We believe massive amounts of redundant sensing are necessary for reliability. We believe self monitoring outside the control loop is also necessary. We were...
  • Assessment: Measuring the Impact of our Programs on Students

    Assessment: Measuring the Impact of our Programs on Students

    General Historical Geology. GEOL 3520 Field Methods. GEOL 3541 Mineralogy. GEOL 3542 Petrology and Petrography. GEOL 1121 Introduction to the Earth. CORE COURSES. Core Area. BS. Field Work. CORE AND REQUIRED COURSES. 4. Graduates will be able to outline the...
  • Rol en betekenis van het CPB - OECD.org - OECD

    Rol en betekenis van het CPB - OECD.org - OECD

    Arial Wingdings Mathematica1 CPB Corel Presentations 8-tekening CPB: Role and position in policy preparation in the Netherlands Content 'Stylized facts' about CPB Illustrations of CPB's unique position Central Planning Bureau?
  • HMA Pavement Perspectives Asphalt Paving Association of Indiana

    HMA Pavement Perspectives Asphalt Paving Association of Indiana

    It was a dark and stormy night! or. If you can't manage your checkbook (or pavements) by hand, no software will help! The Stage. 1/8/2014. Slide
  • Digital Material Preparation for TESOL

    Digital Material Preparation for TESOL

    Digital Material Preparation for TESOL A TESOL Electronic Village Online Course ... a detailed explanation of the resource a step-by-step procedure resulting in a product an example of the product a wiki/database for posting their own result Delivery Moodle LMS...
  • Applying for Financial Aid 2009-2010

    Applying for Financial Aid 2009-2010

    Times New Roman Arial Monotype Sorts Wingdings Comic Sans MS Arial Unicode MS MS Pゴシック Calibri Symbol Verdana Yvonne Borrego's Presentation 1_Side Bar Microsoft Clip Gallery Microsoft Photo Editor 3.0 Photo Applying for Financial Aid 2009-2010 What Will You Learn...
  • A Arte de esquecer Ivn Izquierdo Instituto de

    A Arte de esquecer Ivn Izquierdo Instituto de

    Esse córtex age inibindo a atividade do hipocampo, principal "locus"da evocação de memórias Extinction and repression are in general processes which cause a reduction of retrieval, not real forgetting They might, however, reduce retrieval so much that they effectively function...
  • e-Child Care (ECC) Provider Information Session Department of

    e-Child Care (ECC) Provider Information Session Department of

    The system gives the parent/designee two weeks (today plus the previous 13 days) to fill in any missing transactions once the issue is resolved ("back swipe") Provider Web Portal - Log In Provider Profile Provider Agreements Case Screen Agreement Screen...